4 Dirty Little Secrets About The Ghost Immobiliser Install Industry
Why Should You Have a Ghost Immobiliser Installed?
Autowatch Ghost is the next-generation vehicle immobiliser. It protects your car from theft. It operates in a discreet manner by connecting to the car's CAN data networks and it requires a unique changing PIN code sequence to be entered in order for the vehicle to begin.
The system is quiet, does not have LED indicators and is unrecognisable by diagnostic tools. It is TASSA approved and recognised by a number of insurance companies.
No key fobs or LED indicators
Ghost immobilisers are a new technology in car security that will stop thieves from driving your vehicle, even if they manage to break into it. It connects silently to the CAN data circuit that is onboard your vehicle, meaning there are no radio signals to be heard. This makes it difficult for thieves to bypass it. It is also undetectable by diagnostics, and does not have an LED indicator that could indicate its location. This makes it a fantastic choice for expensive or rare vehicles, such as classic automobiles.
Autowatch Ghost is a small device that is able to be hidden inside the vehicle's loom. This makes it nearly impossible for thieves and intruders to find it. The device connects to the CAN system and connects to the ECU (Engine Control Unit) to stop theft. It is easy to install and can be completed in less than an hours. It's also less intrusive than other physical security devices, like steering wheel locks.
The device utilizes the same technology as GPS tracking devices, however it prevents car theft by stopping the vehicle from starting. It makes use of buttons inside your vehicle to create a unique and reversible PIN code that has to be entered before you can drive your vehicle. The device can be programmed to use obscure buttons, like those on the back of the rear demister, to make it harder for thieves to figure out the PIN. This type of technology is becoming more and more popular, and a lot of insurance companies are now requiring it for vehicles that have keyless entry systems.
Another benefit of the Ghost is that it impedes key-cloning and hacking. The device is connected to the vehicle's CAN bus and uses the buttons to generate a unique code that can be altered. This code must be entered to start the car. The device is not able to be beaten by altering the ECU or adding new key fobs. Instead, the burglar will require a special tool to get around the immobiliser.
The ghost immobiliser is purchased for a low cost and is paired with GPS tracking to ensure the safety of your vehicle. It is an excellent choice for older vehicles and can help you save money on insurance cost. If you're thinking about an immobiliser that ghosts, call us at Trackershop for an estimate. We'll add the installation into the price, so you will be able to rest assured regarding the security of your vehicle.
ghost immobiliser install is TASSA Approved
Immobilisers are the most effective method to protect your vehicle. It stops your vehicle from starting unless the correct PIN code is entered and also disables other features such as the starter motor or fuel pump. motor. An immobiliser that is professionally installed is essential. Installers should be TASSA-approved, to ensure that the product is safe to use and functions properly. The process involves checking the installer's credentials. This includes a criminal background check and an identity check.
ghost immobiliser install is the latest solution to prevent thieves from stealing your car. It connects directly to the CAN data network of your vehicle and doesn't require additional fobs or alarm systems. The system is completely silent and cannot be detected by thieves or car trackers. It makes use of the buttons on your steering wheel, door panels and centre console to create an individual PIN code sequence. The correct sequence has to be entered to start your car, making it incredibly difficult for thieves to hack.
This revolutionary immobiliser is TASSA-approved and can be installed by Trackershop which is a company that specialises in the installation of this device. It also offers a range of other security items for your vehicle, such as an anti-theft tracker and remote car starter. The team of technicians can install the device in your home or office.
It is essential to secure your vehicle, since increasing numbers of vehicles are being stolen without keys of the owners. Modern keyless cars are particularly vulnerable, as cloning tools and door lock picks are easily available on the internet. An Autowatch Ghost can assist to prevent this, as it can't be detected by thieves or picked up by the vehicle tracker.
The Ghost II CAN is completely concealed and is not able to be altered by thieves. It is able to detect attempts to alter the ECU and close certain parts of the engine in an attempt to deactivate it. It also disables the alarm system in order to avoid getting attention from the wrong people and allow thieves to flee.
Reversible
The Ghost immobiliser is a completely removable security system that is able to be removed and put in place at anytime. It is directly linked to your vehicle's Controller Area Network (CAN) and provides you with an individual PIN code that only you are aware of. Once the PIN code is correctly entered, the car will not start, and thieves will be discouraged from trying to steal it.
The installation of the Ghost is non-invasive and your warranty will not be affected. The system can be used with any alarm or tracker that you have installed aftermarket. It will not leave any trace on the exterior or interior of your car. It's not noticeable to thieves since it does not utilize keys or LED indicators.
The Ghost Immobiliser is not one of the devices used by organized car burglars to identify circuit wiring on vehicles. Instead, it utilizes buttons on the steering wheel or dashboard to allow you to set an individual PIN code sequence. The code has to be entered to start the car.
The Ghost Immobiliser will also shield your vehicle from OBD port hacking. This type of theft has become more popular, and it's one of the most difficult ways to stop. The Ghost Immobiliser helps prevent these thefts as it blocks the theft perpetrator from connecting a laptop to the OBD port of your vehicle and cloning keys.
The Ghost can be used in conjunction with a vehicle tracking device. This can be extremely useful for locating your car after it has been stolen. However, it is not recommended that you use a tracker as your primary security measure against theft since they don't stop the theft at all. They are also much simpler to detect and remove from a vehicle than the Ghost immobiliser.
Easy to install
A Ghost immobiliser is an innovative new technology that can help protect your car from theft. It works by connecting to your vehicle's CAN (Controller Area Network) system and creating an individual code sequence that is hard for thieves to crack. It is an inexpensive and efficient method to protect your car from being taken.
Ghost is designed to work with all vehicles including keys from aftermarket manufacturers. The device creates a unique PIN code using the buttons on your dashboard, central console and steering wheel. This stops thieves from opening your car. It has a number of additional features, like a GPS tracker to locate your vehicle.
This type of device is a preferred choice for many drivers due to the fact that it provides protection against different types of car theft. It is easy to install, quiet, and does not use radio signals. It's a great option for those who do not wish to purchase a full alarm system. However, it is important to employ a professional to install the device to ensure that it works properly.
It's important that you have a professional install your ghost immobiliser to ensure it works as it should. A professional will know where to put it and ensure that the device is connected to your vehicle's electronic system. The installer will also ensure that the device is hidden from view and can't be visible to anyone who doesn't have a specific reason for knowing about it.
The Autowatch Ghost II can be set to the Valet/Service mode which allows you to drive at 30 mph without the access key. This makes it ideal for valet parking or moving your car. It can even be used in this manner when your vehicle is being maintained by dealers. This mode can be turned off with the companion app and can be reset at the end of each use.
The Ghost is the only aftermarket CAN-bus immobiliser that does not require wire cutting. It connects directly to your vehicle's onboard CAN network and is not detectable by diagnostic tools or cloning devices. It is tamperproof, silent, and doesn't emit any radio signals. It's also reversible, permitting you to move it to another vehicle in the event of need.